SECURITY SENSORS
Infrared Beams
Point-to-point invisible infrared detection ideal for medium to long range perimeter intruder systems.
The cornerstone of any perimeter intruder system is the detection sensor, and active infrared beams have long been regarded the pinnacle; balancing precise, dependable, long-range protection with unrivalled reliability and catch performance in all outdoor environments.
New Arrivals
In case you missed it, here's everything that's new to TAKEX beam sensors.
PB-60TX
New-generation with improved performance, easy alignment, & reduced consumption.
TXF-20TDM
Compatible with leading wireless systems and featuring double modulation technology.
TA-PW Series
Pre-wired with heaters, thermostat, tamper switch, and brackets for two Quad Beams.
Twin Beams
The gateway into infrared beam detection, Twin Beams are low cost and easy to install – a simple product for straightforward applications less likely to be influenced by animals, wildlife, and vegetation.
They create a perfectly defined invisible line of detection between two points, commonly used to signal intrusion events across driveways, gateways and courtyards, or mounted to sides of buildings to cover single or multiple windows and doors.
Great for domestic, industrial, and prestigious applications, Twin beams provide exceptional catch performance in an affordable package for zones up to 100m.
UP TO 100M / 330FT
TECHNOLOGY FOCUS
By combining a Double Modulated beam with a Tuning Amplifier and Phase Locked Loop (PLL) system, TAKEX Photoelectric Beam Sensors offer complete protection like no other.
Our patented use of these 3 technologies ensures unrivalled tolerance against direct & reflected sunlight, vehicle headlights and other light sources up to 50,000 lux.
Quad Beams
The ultimate in perimeter intruder detection, our Quad Beams synchronise 16 beam paths for maximum stability in problematic environments, with a single set capable of protecting up to 200m, or multiple sets extending to perimeters several kilometres long.
Creating an impenetrable line of invisible protection, Quad Beams can be deployed as standalone perimeter intruder detection systems, or to compliment CCTV as part of a layered security system, providing first-line, real-time event signalling regardless of weather conditions or time of day.
Whether securing domestic, commercial, and industrial property, or protecting high-risk assets and critical infrastructure, our high-performance Quad Beams remain the quintessential choice for precise, dependable outdoor detection.
UP TO 200M / 660FT
PB-IN-HFA Series
Our most popular series, up to 200m / 660ft with 4-channels and environmental monitoring.
PXB-F Series
A wider beam pitch and IP65 housing for simple perimeters up to 200m / 330ft.
PXB-HF Series
This is the flagship; wide pitch, IP65 and 4-ch for complex perimeters up to 200m / 330ft.
PB-HFA-KH Series
Our market leading PB-IN-HFA series optimised for use in TA Series Beam Towers.
Battery Beams
There will always be installations where providing power is a problem. In remote applications there may simply be no power, on sensitive sites civil works may be undesirable or impossible, or for temporary installations cables can be impractical. Designed for universal compatibility with third-party wireless systems, our Battery-Operated Beams offer industry-leading features and technologies without the need for cables.
Ideal for rapid deployment to create temporary or permanent long-range perimeter protection in even the most remote of areas, Battery Beams are perfect for securing renewable energy infrastructure such as solar and wind farms, and provide a viable security solution to ecologically, historically, or environmentally sensitive areas.
TXF-125DM - MISSION: IMPOSSIBLE
TXF-125DM is the first battery operated quad beam detector of its kind, using double modulation technology for enhanced rejection of direct & reflected sunlight, vehicle headlights and other light sources.
Designed for compatibility with leading wireless systems, TXF-125DM is ideal for rapid deployment, and can be used to create temporary or permanent long-range perimeter protection in even the most remote of areas, including renewable energy infrastructure such as solar and wind farms, together with ecologically, historically, or environmentally sensitive installations.
IP CONNECTED DETECTION
With the IP interface module our photoelectric beams are as easy as IP cameras to install and integrate with Video Management Systems.
Create powerful security solutions where recording starts automatically, cameras are directed to the location of intrusion and guards are alerted with detailed alarm information.
Only an ethernet cable from the product to the nearest PoE switch is required.
Anti-Crawl
Designed for those edge case installations that demand the highest level of security, our Anti-Crawl Beams will detect any low-level or crawling intrusion attempt, ideal for Prisons, Military Compounds, and Nuclear Facilities, or similar high-risk applications where protection is paramount.
Coupled with Quad Beams, they provide an impenetrable wall of invisible detection to thwart even the most determined of intruders (or escapees).
UP TO 100M / 330FT
WE CAN HELP
Need assistance with product selection or system design?
Reach out to our team of experts for advice.
Reflective
What if you can’t get power to one end of a zone, or it’s too time consuming or cost prohibitive to do so?
Reflector Beams are designed for applications where a beam-break between two points is desirable, but running cable to both ends is impractical. With transmitter and receiver in the same housing, the beam is bounced from a reflector positioned opposite, creating a simple line of invisible detection.
They are ideal for short-distance protection across entrances and exits, corridors and staircases, or across waterways, roads, and pathways.
UP TO 30M / 100FT
Miniature Beams
Miniature Beams are designed for indoor installations where discretion and aesthetics are of paramount importance, perfect for covert protection of ATM machines, motor driven shutters, windows, and corridors, or for prestige applications such as museums, galleries, and showrooms.
Tiny flush-mounted sensor heads can be hidden in plain sight, for up to 10m of invisible point-to-point protection.
UP TO 10M / 33FT
Product Guides
Need some help with our products? We've created the following guides to answer the most common questions on product selection and installation.
A GUIDE TO INFRARED BEAMS
REFLECTIVE BEAM GUIDE
PR-5B INSTALLATION TIPS
WHERE TO BUY TAKEX SENSORS
Available from leading Security Distributors throughout Europe, The Middle East & Africa
We've partnered with leading Distributors across the Security Industry, delivering high-performance Intrusion Detection to installers & systems integrators throughout EMEA.
Industry Awards
Subscribe
Sign up to receive latest news releases and product updates