TAKEX sensors protect people and property the world over. Here's just a few examples of our products in the wild...

When it comes to protecting the lead on Church roofs, divine intervention isn't always enough. This is where quality, coupled with versatility comes into its own. In this example the TX-114FR battery powered dual-zone PIR sensors have been configured to protect the entire roof; ignoring the feathered faithful, without the coverage spilling into the trees close by which enjoy dancing in time with the slightest breeze.

• TX-114FR

Designed for compatibility with leading wireless systems, the battery operated TXF-125DM is ideal for rapid deployment and can be used to create temporary or permanent long-range perimeter protection in even the most remote of areas, including renewable energy infrastructure such as solar and wind farms.

• TXF-125DM

With its black anodised aluminium chassis and impact-resistant polycarbonate shielding, TA series Beam Towers combined with PB-HFA-KH series Quad Beams are the perfect solution for harsh marine environments. By synchronising 16 beam paths between transmitter and receiver units, our Quad Beams ensure reliable, dependable detection even with the movement of jetties, coupled with double modulation technology for enhanced rejection of direct & reflected sunlight from the water surface.

• PB-HFA-KH Series
• TAS Series
• TAD Series

Our high-performance PIR-T series sensors offer the ultimate in detection versatility. Precision triple mirror optics and intelligent signal processing ensure accurate detection from a mounting height of 2m to 6m.

• PIR-T Series

The PB-10NS is designed to be used where discretion or aesthetics are of paramount importance, perfect for covert or prestige applications such as museums, galleries, and stately homes.

• PB-10NS

Our Quad Beam detectors synchronise 16 beam paths between transmitter and receiver for maximum stability in severe weather conditions, ideal for electronic intruder detection of exposed long range perimeters such as airports and borders.

• PB-HFA-KH Series
• TAS Series
• TAD Series

Beams offer a simple way of protecting critical infrastructure by providing a quick, reliable detection barrier that is invisible to the naked eye. They can be used in conjunction with other perimeter detection systems for multi-layered security, alerting to any breach of the perimeter boundary.

• PB-IN-50HFA
• PB-TE Series

One TX-114FR mounted on a wall can provide a semi-circle of pet tolerant detection extending 12m to its left and 12m to its right for up to 226m² of coverage. Two TX-114FR mounted back-to-back on a post can provide a full 360 degrees of pet tolerant detection. Powered by a single 3V to 9VDC alkaline or lithium battery and compatible with leading wireless transmitters, it's the perfect detector for rapid deployment in remote or difficult-to-cable-to areas.

• TX-114FR

With faster detection than conventional smoke alarms, our flame sensors are practical where smoke detection is not an option, such as diesel engine rooms and open environments.

• FS-2000E

A 90,000m² distribution hub, a 1.5km perimeter, 22 Beam Towers, and 1 heck of an intruder detection system. TA series Beam Towers with PB-HFA-KH series Quad Beams can be quickly and easily specified and installed, featuring signal verification and real-time sensitivity adjustment to create robust intruder detection systems at scale.

• PB-HFA-KH Series
• TAS Series
• TAD Series
• TAW Series

Our MS-12/TX-114 series Dual-Zone PIR sensors combine horizontal and downward curtains which require simultaneous activation for alarm, so while cats, dogs, foxes and badgers will be activating only the downward zone, the sensor will not report an alarm - perfect for use in domestic outdoor applications.

• MS-12 Series
• TX-114 Series

PB-IN-HFA series Beam sensors are actively safeguarding high-level Royal, Government and Military buildings the world over - a mighty endorsement if we do say so ourselves.

• PB-IN-HFA Series
• PB-IN-100AT

Our Battery operated wireless-ready Dual-zone PIR sensors are the cornerstone of scaffold alarm systems, used to trigger CCTV for remote monitoring or to signal on-site alerts.

• TX-114 Series

We developed PXB-100ATC for high-risk applications where detection of all intrusion attempts is critical, using a unique synchronised timing system to achieve unrivalled detection performance and versatility. Multiple units can be integrated into a Tower configuration to create high security detection zones up to 100m outdoors, to a height of over 8m.

• PXB-100ATC-KH
• TAS Series
• TAD Series

Twin and Quad beams protect the perimeter, installed with thermistor heaters to avoid false alarms due to frost and condensation prevalent in rural installations. The beam-break is used to trigger floodlights as well as a high output sounder.

• PB-TK Series
• PB-FA Series