Photoelectric Beams provide a quick, reliable, wall of protection between two points, invisible to the naked eye. Cost per foot they are one of the cheapest forms of detection, whether covering a few feet or several miles. They can be used standalone for simple detection or combined to cover complex perimeters in multi-layered security systems.
No matter your requirements, we have a Beam for you.
Use our Beam Finder Tool to help identify the right Beam for you
Twin Beams are the most commonly used beams. As the name suggests there are two beams between transmitter and receiver units, both of which need to be broken to initiate an activation.
Twin Beams are ideal for protecting windows, doors, fence lines and driveways.
If you need one beam in one position then these are your guys, up to 100m / 330ft.
New-generation with improved performance, easy alignment, & reduced consumption.
Quad Beams feature four transmitter points talking to four receiver points, for a total of 16 synchronised beam paths between transmitter and receiver units.
This helps to ensure maximum stability in any perimeter intruder environment.
Our most popular series, up to 200m / 660ft with 4-channels and environmental monitoring.
A wider beam pitch and IP65 housing for simple perimeters up to 200m / 330ft.
This is the flagship; wide pitch, IP65 and 4-ch for complex perimeters up to 200m / 330ft.
100m / 330ft protection with ultra-low current draw for solar and battery operation.
Our market leading PB-IN-HFA series optimised for use in TA Series Beam Towers.
A modified PXB-HF series designed specifically for use in TA Series Beam Towers.
Anti-Crawl beams are designed to be used in the highest of security applications, such as Prisons, Military Compounds, Nuclear Facilities, or any other high-risk sites where protection is paramount.
These beams should be used in conjunction with TAKEX Quad beams, to provide a solution that will catch even the most determined of intruders.
By combining a Double Modulated beam with a Tuning Amplifier and Phase Locked Loop (PLL) system, TAKEX Photoelectric Beam Sensors offer complete protection like no other.
Our patented use of these 3 technologies ensures unrivalled tolerance against direct & reflected sunlight, vehicle headlights and other light sources.
With the IP interface module our photoelectric beams are as easy as IP cameras to install and integrate with Video Management Systems.
Create powerful security solutions where recording starts automatically, cameras are directed to the location of intrusion and guards are alerted with detailed alarm information.
Only an ethernet cable from the product to the nearest PoE switch is required.
The principle of a Reflector Beam is the same as any other active infrared beam, but the transmitter and receiver are within the same housing.
Reflector Beams are designed for applications where a beam-break sensor is desirable, but running cable to both ends is impractical; ideal for short-distance protection across entrances and exits, corridors and staircases, or across waterways, roads, and runways.
A 1m / 3.3ft direct reflection presence sensor without the need for a reflector unit.
Up to 5m / 16.5ft indoor detection ideal for doorways, roller shutters & entrances.
From miniature beams for covert applications to monstrous beams for border protection, we have solutions for any requirement.
Point-to-point or reflective Single and Twin Beams for covert use up to 10m / 33ft.
Sign up to receive latest news releases and product updates