| Model |
PB-10NSE |
| Pdf File |
CUT SHEET PB-10NSE/TNSE, PB-4RNS/RTNS <<< - Click to Download PDF File |
| Installation Guide |
Registered Users have access to Installation Guides |
| Detection System |
Single Active Infrared Beam |
| Wavelength |
940nm |
| Modulation |
Modulation: 500Hz |
| Protection Distance Outdoors |
10m (33ft.) |
| Protection Distance Indoors |
10m (33ft.) |
| Response Time |
100msec. |
| Frequency Selection |
Not Applicable |
| Alarm Output |
Dry Relay Contact
N/O, N/C Switch Selectable
Reset: Approx. 1.5 secs. |
| Contact Rating |
30VAC/DC 0.3A Max |
| Environmental Output |
Not Applicable |
| Contact Rating1 |
Not Applicable |
| Tamper Output |
Not Applicable |
| Contact Rating2 |
Not Applicable |
| Alarm Led Red |
On at Alarm |
| Sensitivity Attenuation Led Red |
Not Applicable |
| Alarm Memory Led Red |
Not Applicable |
| Lens Adjustment |
Not Applicaple |
| Supply Power |
10 to 30VDC ( non polarity) |
| Current Consumption |
45mA Max. |
| Ambient Temperature |
-31°F to + 151°F (-35°C to + 66°C) |
| Installation |
Wall or Post mounting |
| Wiring |
Terminals |
| Accessories |
Refer Accessory Listing |
| Weight |
Sensors + Control: 13.6oz (380g) |
| External Appearance |
Sensors: PC Resin (clear)
Control: ABS Resin (white) |
