| Model |
PB-IN200HF |
| Pdf File |
2010_PBINHF - Click to Download PDF File |
| Installation Guide |
Registered Users have access to Installation Guides |
| Detection System |
Quad, Active Infrared Beam |
| Wavelength |
940nm |
| Modulation |
Double Pulse Modulation |
| Protection Distance Outdoors |
200m (660ft.) |
| Protection Distance Indoors |
400m (1320ft.) |
| Signal Arrival Distance |
2000m(6600ft.) |
| Response Time |
50-700msec.Adjustable |
| Frequency Selection |
4 Channels |
| Alarm Output |
Dry Relay Contact
N/O, N/C Switch Selectable
Reset: Approx. 1.5 secs. |
| Contact Rating |
30VAC/DC 1.0A Max |
| Environmental Output |
Dry Relay Contact
N/O, N/C Switch Selectable |
| Contact Rating1 |
30VAC/DC 1.0A Max |
| Tamper Output |
Micro-switch Dry Contact
Form B, N/C |
| Contact Rating2 |
30VDC 0.1A |
| Alarm Led Red |
On at Alarm |
| Sensitivity Attenuation Led Red |
On when beam reception is attenuated |
| Alarm Memory Led Red |
Pulsing at Alarm
Manual Reset: By Auxilliary Switch
Auto Reset:55 to 60mins. |
| Lens Adjustment |
Vertical: 10°
Horizontal: 90° |
| Supply Power |
10 to 30VDC ( non polarity) |
| Current Consumption |
85mA typical (120mA Max.at alignment) |
| Ambient Temperature |
-31°F to + 151°F (-35°C to + 66°C) |
| Installation |
Wall or Post mounting |
| Wiring |
Terminals |
| Accessories |
Refer Accessory Listing |
| Weight |
Transmitter: 1200g (42oz)
Receiver:1300g (45.5oz) |
| External Appearance |
Body: PC Resin (wine red) |
