Latest news
Peace of mind protection
For over 50 years TAKEX has provided active infrared detection devices for industrial, commercial and domestic installation. In this time ...more
Intersec 2015
We will be exhibiting at Intersec 2015 in partnership with our global distrubutor ADI from 18-20 January, showcasing our range of passive and active i ...more
+44 1256 475555
TAKEX Europe Ltd
Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8PE UK
contact us by email here
Products / PIR-30WE



With a mounting height up to 3.5m coupled with a creep zone of less than 1m, we can offer 30m x 30m high-density coverage (PIR-30WE) or 50m x 3m curtain coverage (PIR-50NE). Using the highest quality mirrored optics coupled with twin pyros, TAKEX offer the most professional long-range outdoor PIR’s to date.


  • High Quality Mirrored Optics coupled with Twin Pyros
  • Installation Height 2m to 3.5m (6.6' to 11.5')
  • Durable Weatherproof AES Resin Housing
  • Sensitivity Adjustment from 30% to 170%
  • Protective Hood to Deflect Rain/Sunlight and guard against Wildlife



  • Specifications
  • Downloads

Model PIR-30WE
Detection system Passive infrared
Coverage Wide angle: 30m (100ft) max.
Sensitive zone 30 zones (60 beams)
Coverage adjustment Vertical: 10 degrees
Horizontal: ±5 degrees
Mounting position Indoor or outdoor wall
Supply voltage 9 to 30VDC (non-polarity)
Current consumption 25mA max.
Alarm output · Dry contact (semi-conductor) output (NC/NO)
· 24V (AC/DC) 0.25A (resistive load)
  (protective resistor 3.3Ω)
· Warm up: approx. 1 min. (no alarm condition)
· One-shot output at detection (approx. 2sec.)
· Continuously output when detecting low supply voltage
Tamper output · Dry contact output: (NC)
· 30V (AC/DC) 0.1A (resistive load)
· Tamper output: real time output
Alarm LED · Red LED
· Blinks during warm-up (approx. 1 min)
· One shot lights (approx. 2 secs) at detection
· Continuously lights when detecting low supply voltage
Functions · Low supply voltage alarm
· Tamper signal
· LED control (L/C)
· Alarm LED (ON/OFF)
· Sensitivity adjustable between 30% and 170%
Ambient temperature -20°C to +50°C (+4°F to +122°F)
Wiring Terminals
Weight 1600g (56oz)
Appearance Body: ABS resin
Cover: PE resin
Accessory Waterproof grommet: 1pc
Tapping screw: 2pcs

Instruction Manual