Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8PE UK
The PB-IN-75SW is an active infra-red photoelectric beam designed specifically for low-current, low-voltage use. This makes them particularly suitable for wireless applications, or difficult-to-cable-to sites without (or unstable) power. An optional Solar panel and Battery Pack (BA-6SL) is available.
They can be used with any make of wireless transmitter (or GSM diallers) to create temporary or permanent secure wireless systems, and can easily be integrated into conventional wired systems at a later date, should mains power become available.
For distances up to 75m (250ft) outdoor / 150m (500ft) indoor.
note: due to UK sunlight levels, the solar-powered (BA-6SL) option may not be suitable for UK use - please contact Takex for advice.
- Low Current Beam for Solar / Battery powered operation
- ideal for temporary systems, difficult-to-cable-to areas, or areas without (or unstable) mains power
- Use with external 6V or 12VDC batteries and any-make wireless transmitters or GSM diallers (not supplied)
- Capable of running for months on battery-power alone
- Optional Solar Panel and Battery Pack (BA-6SL) available
|Product type||Photoelectric Beam Sensor|
|Detection system||Simultaneous interruption of beams|
|Infrared beam||LED pulsed beam, Double modulation|
|Protection distance||Outdoor 75m (250ft) or less|
|Max. beam range||Outdoor 750m (2500ft) or less|
|Response time||50msec. to 700msec. variable (Standard : 50msec.)|
|Supply voltage||5V to 8VDC or 10V to 30VDC (with-polarity)|
|Current consumption||5V to 8VDC : 6mA or less when armed
10V to 30VDC : 25mA or less when armed
|Alarm output||Dry contact relay Form C
Reset : Interruption time + off delay 2 secs.
Contact capacity : (30V AC/DC) 1A
|Environmental output||Dry contact relay Form C
Action : Output when weather conditions worsen
Contact capacity : 30V (AC/DC) 0.5A or less
|Tamper output||Dry contact relay Form B
Action : Activated when cover is removed
Contact capacity : 30V (DC) 0.1A or less
|Alarm LED||Red LED (Receiver)
ON : when an alarm is initiated.
|Attenuation LED||Red LED (Receiver)
ON : when beam is attenuated.
|Functions||Modulated beam frequency selection (4-Channel)
Environmental fade out monitor
Beam strength monitor output
|Ambient temperature range||-25°C to +60°C (-13°F to +140°F)|
|Mounting positions||Outdoor (Perimeter protection)|
|Weight||Transmitter : 1200g (42oz)
Receiver : 1300g (45.5oz)
|Appearance||PC resin (wine red)|