Latest news
Search our site
SELECT YOUR REGION
TAKEX
Please select your region from the drop-down menu above to find your nearest TAKEX office
Please select your region from the drop-down menu above to find your nearest TAKEX office
contact us by email here
Tower Beams /
PB-100AT-KH
PB-100AT-KH
Description
Takex PB-100AT-KH Anti-Crawl Beams are available for high-security applications to detect low-level or crawling intrusion, designed specifically for use in Takex TA Series Beam Towers.
Supplied with PTKH ‘Quickfix’ mounting brackets for fast, trouble-free assembly, the beam units locate in vertical slide-channels in the TA tower spine, allowing easy and precise height adjustment.
Takex KH Beams and TA Towers are the perfect combination for reliable perimeter intrusion detection in the most demanding of situations.
For distances up to 100m (330ft) outdoor / 200m (660ft) indoor.
Features
- Dual Synchro-Twin Beams to detect crawling intrusion
- Selectable 4-Channel Beam Frequencies
- Double Modulated Beam for unsurpassed Light Immunity
- Monitor Jack for alignment with Multi-Meter
- Audible Alignment Tone
- Environmental (anti-fog) Monitoring Circuit
- Dynamic A.G.C. Circuit
- Double coated electronics for corrosion protection
- For use in TA Series Tower Enclosures
Details
Specifications- Downloads
| Model | PB-100AT-KH |
| Product type | Photoelectric Beam Sensor |
| Detection system | Simultaneous breaking of 4 beams or Upper 2 beams interruption or Lower 2 beams interruption |
| Infrared beam | LED pulsed beam, Double modulation |
| Protection distance | Outdoor 100m (330ft) or less Indoor 200m (660ft) or less |
| Max. beam range | Outdoor 1000m (3300ft) or less Indoor 1000m (3300ft) or less |
| Response time | Dual response time system : 35-500msec. (AND) 100, 200, 300, 500msec. (OR) |
| Supply voltage | 12V to 30VDC (Non-polarity) |
| Current consumption | 85mA or less at protection |
| Alarm output | Dry contact relay output 1c Reset : Interruption time + off delay Contact capacity : 30V AC/DC, 1A or less |
| Environmental output | Dry contact relay output 1c Action : Output when weather conditions worsen Contact capacity : 30V AC/DC, 1A or less |
| Alarm LED | Red LED (Receiver) ON : when an alarm is initiated. |
| Attenuation LED | Red LED (Receiver) ON : when beam is attenuated. |
| Functions | Modulated beam frequency selection (4-Channel) Environmental module Beam power selection Alarm memory indication Programmed AGC Auto-gain lock function Sound check : Audible check of beam level Monitor jack output |
| Ambient temperature range | -35°C to +66°C (-31°F to +151°F) |
| Beam adjustment | Horizontal: ±90° / Vertical: ±10° |
| Mounting positions | Outdoor (Perimeter protection) |
| Wiring | Terminals |
| Weight | Transmitter : 300g (10.6oz) Receiver : 400g (14.1oz) |
