
Please select your region from the drop-down menu above to find your nearest TAKEX office

PA-6612E
Description
The PA-6612 is a novel approach to the issue of false alarms and pet tolerance in PIR motion detectors. Through the use of “Twin Dual-Element” mirror optic detectors, Takex has created a ceiling mount detector with no equal in the security industry.

The PA-6612 uses “non-linear” mirror adjustment technology, ensuring maximum performance over a given area on ceilings up to 4.0m. The secret to the amazing performance of the PA-6612 is in the way that the mirrors are adjusted in reference to each other. It is “non-linear”, meaning that as the detectors mounting height increases, the angle of separation of each lens decreases, thereby maintaining a steady “aspect ratio”.
Contrary to popular belief, it is not acceptable to fit a wall mount detector on a ceiling bracket above its recommended mounting height, and then adjust it to look down. This will cause each layer of fingers to separate creating a virtual “dead zone” that will not detect movement. Twin PIR’s are not new but Twin-Mirror-Non-Linear PIR’s are. With “rock solid” performance, the PA-6612 offers installers the opportunity to virtually eliminate false alarms from the toughest of environments.
Features
- unique twin mirror and two twin pyro optics for high discriminating capability
- accurately detects human intrusion whilst rejecting nuisance alarms from small animals
- geared mirror array ensures maximum performance regardless of mounting height up to 4m
- detachable base unit with snap-in/out sensor design for easy installation
- photo MOSFET relay for silent operation
- high RFI and EMI immunity
Details
Specifications
Downloads
| Model | PA-6612E |
| Product type | Passive infrared sensor |
| Detection system | Passive infrared |
| Coverage | Wide angle: 12m (40ft) max. |
| Sensitive zone | 17 pairs (64) |
| Supply voltage | 10.5 to 18VDC (non-polarity) |
| Current consumption | 25mA max. |
| Alarm signal | Dry contact (NO/NC selectable) Reset: approx. 2 sec, 24V, 0.25A max. (Protective resistor 3.3Ω) |
| Alarm memory | Auto: 3 mins. flashing, 47 mins lighting Manual: manual control |
| Alarm LED | Red: blinking at warm-up Lighting at alarm (LED disabled) |
| Memory LED | Yellow: blinking at memory activated lighting at memory indication |
| Adjustment | Vertically: 19.5 degrees, Horizontally: 25 degrees |
| Count changeover | 1/2/3/4 changeover |
| Ambient temperature | -15°C to +55°C (+5°F to +131°F) |
| Mounting position | Indoor ceiling (wall mount with optional BCW-401) |
| Wiring connection | Terminals on separate base unit |
| Weight | 135g (4.7oz) |
| Appearance | Body: ABS resin Cover: PE resin |
| Accessory | Tapping screw: 2pcs Sensor locking screw: 1pc |


