Latest news
Peace of mind protection
For over 50 years TAKEX has provided active infrared detection devices for industrial, commercial and domestic installation. In this time ...more
Intersec 2015
We will be exhibiting at Intersec 2015 in partnership with our global distrubutor ADI from 18-20 January, showcasing our range of passive and active i ...more
+44 1256 475555
TAKEX Europe Ltd
Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8PE UK
contact us by email here
Products / FS-2000E



10m / 7cm Flame

The FS-2000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.


  • high sensitivity ultraviolet flame sensor
  • detachable base unit with snap-in-out sensor design
  • adjustable detection area
  • built-in sounder
  • NO/NC relay output
  • adjustable response time



  • Specifications
  • Downloads

Model FS-2000E
Detection system Ultraviolet rays detection
(detected wave length 180~260nm)
Detection area Distance: 10m (33ft) max. (7cm flame)
Angle: approx. 120 degrees conically
Adjustment range 
· Horizontal 25 degrees by base unit
· Vertical 30 degrees (4 steps) by sensor head
Sensitivity adjustment Detection timer 4 steps (0.2/1/6/30sec)
Power supply 10V to 30VDC (non-polarity)
Power consumption Standby: 25mA or less
Alarm: 75mA or less (sound ON) / 40mA or less (sound OFF)
Alarm output Dry contact relay Form C (NO/NC)
Contact action: off-delay (approx. 2 sec.)
Contact capacity: 30V (AC/DC) 0.3A, (protective resistance 3.3Ω)
Alarm memory Auto-reset operation (on/off setting available)
Memory LED blinks for 3min., then lights for 47min.
LED Alarm LED (red): light on for off-delay 10 sec.
Memory LED (yellow): light on for memory, blinks at start-up
Buzzer Alarm: intermittent every 0.2 sec during off delay 10 sec
Volume: 80dB or more 1m (3.3ft) ahead (silent setting available)
Tamper output Dry contact relay form b (NC)
Capacity: 30V (AC/DC) 0.1A
Wiring Terminals
Ambient temperature -10°C to +60°C (+14°F to +140°F)
Installation Indoor (ceiling or wall mount)
Weight Approx. 150g (5.3oz)
Appearance ABS resin (white)
Supplied accessories · Sensor locking screw: 1pc
· Tapping screw: 2pcs

Instruction Manual